Diy fish tank stand

DIY Projects.

Many hobbyists who are also handy with do it yourself projects will build their own aquarium stands allowing for the exact features, measurements, and overall look they want. I have always built my stands so I could get a larger sump as well as better internal height for more skimmer options. Below are a few aquarium stands that I have built over the years. If you are somewhat handy at wood working and wood finishing, this should be an easy project for you. As these stands need to hold a lot of weight and must be safe, I do tend to over build them at least a little. My First Example.

Diy fish tank stand

I built this stand to be extra sturdy since it was going to be holding quite a bit of weight with all the water. His tank was 30 gallons and fit perfect. This post contains affiliate links. Please see disclosure policy for details. To keep this cabinet as sturdy as possible, I build the majority of the frame from 2x4s. To help hold the weight in the middle, I built another frame piece from 2x2s. Now it was time to assemble the middle panel and the side panels together to make the cabinet frame complete. I used 2x4s at the top, bottom, front and back to attach it all together. Side note: You can see below that when I built this, I used 2x2s along the back edge and 2x4s at the front. You could do that, but in hindsight, I think 2x4s are better for this project.

On the left-hand photo below you can see my ReefKeeper Elite head unit that I use to control the system pumps, lights, skimmer, pH, etc.

Last Updated: January 2, Approved. This article was co-authored by Aaron Bernard. With over ten years of experience, Aaron specializes in aquarium maintenance, custom design, manufacture, installation, and moving. Aaron holds a BS in Biochemistry from Arizona State University, where he studied the effects of climate change on coral reefs and began to propagate his corals. This article has been viewed , times.

When you buy through links on our site, we may earn a commission. Ikea, lowes, and PetSmart all have their versions of what they think an aquarium stand should be. So, I decided to make my own DIY aquarium stand. In this guide, we will not go to cover a step-by-step tutorial on building an aquarium stand. Not to mention, they are usually pretty expensive too! To help inspire you, here are several different DIY stand ideas for a 10 gallons aquarium:. Safety is the number one priority when building a stand, so you should add some siding and backing to reinforce everything. This one has a square design that you might see in a store but on a smaller scale. It might be a bit more stable than the above one as it provides vertical support in all four corners, all the way from the tank to the floor.

Diy fish tank stand

Building your own aquarium stand can be a cost-effective and rewarding way to ensure your fish tank is well-supported, and you can customize its design, size, and colors. Learn how to build a fish tank stand with these 25 free DIY aquarium stand plans to boost your home decor and smartly showcase your aquatic pets. Choose your own adventure from simple DIY aquarium stands for beginners to the DIY 55 gallon fish tank stand for those seeking a bigger challenge. Our carefully put-together aquarium stand plans are well structured and complete with easy, step-by-step instructions. Each DIY aquarium stand tutorial provides clear details about the materials required, including wood, screws, and paint.

Furnished apartments greensboro nc

You can see the plywood spacers in between the 2 x 6s. You can see here that I wrapped the legs with the base trim. This is a time-consuming job and, although I have made furniture before using this method, I needed a total of seven panels, so I looked for a faster way. We're glad this was helpful. You can just see a shelf at the bottom of the same photo. I wanted to make sure the wood will be as best protected from moisture that it can be. If you've never built anything before, you'll find that this guide's information will be invaluable. Thanks Helpful 27 Not Helpful Last Updated: January 2, Approved. I took a little different approach for my gallon aquarium stand. Once your table is completed, you can look at other options regarding your tank. This means that there are no holes to fill, as they are almost invisible. I cut the wood to fit and glued and nailed it to the frame. Aquarium stands are used to hold your aquarium.

.

I used coated deck screws throughout. Attach doors to the front of your stand, if desired. After cutting all the molding, I fitted it to the frames with glue and pins. Use a circular saw to cut 2 2x4s to the desired length, 4 2x4s to the desired width, and 8 2x4s to the desired height. You may also want to use wood adhesive to ensure that the 2x4s are securely attached to each other. This gave me the look I was wanting. This is backward for building a good aquarium stand and should be considered. It's an attractive piece of furniture with 4 doors and can house a gallon tank or larger. Allow the wood glue to dry for at least 2 hours before moving forward. Looking for a DIY stand to house your fish tank?